Xhorse VVDI Key Tool Plus Pad All-in-one programming device

Xhorse VVDI Key Tool Plus is a professional all-in-one key and immobilizer programming tablet designed for automotive locksmiths, key specialists, and workshops. It combines OBD key programming, transponder generation and cloning, remote functions, EEPROM and MCU programming, and advanced manufacturer-specific immobilizer functions in one 10.1” tablet.

Key Tool Plus is suitable for both everyday key programming and more advanced BMW, Mercedes-Benz, Volkswagen, Audi, and other immobilizer applications. It features an integrated transponder reader, remote frequency detection, Mercedes-Benz infrared reader, and programming interfaces for EEPROM, MCU, and vehicle module work.

The tablet can also control compatible Xhorse key cutting machines, allowing both electronic programming and mechanical key cutting to be handled within the same system.

Features

• OBD IMMO Programming — Vehicle-specific key and immobilizer programming through the OBD connector on supported vehicles.
• Transponder Generation — Generates multiple common transponder types for Xhorse Super Chip and compatible transponders.
• Transponder Detection — Identifies transponder type and basic information.
• Transponder Cloning — Supports cloning of multiple transponder types.
• Remote Generation — Generates Xhorse universal remotes and Smart Keys according to vehicle application.
• Remote Renew — Supports renewal of selected used remotes and Smart Keys.
• Remote Frequency Detection — Detects remote radio frequency.
• EEPROM / MCU Programming — Reads and writes supported EEPROM and MCU chips and vehicle modules.
• File Make Key — Enables key creation from supported immobilizer data files.
• Mercedes-Benz IR — Integrated infrared interface for Mercedes-Benz key and EIS/EZS applications.
• BMW IMMO — Supports multiple BMW CAS, FEM, and BDC systems and vehicle-dependent ISN functions.
• VAG IMMO — Supports Volkswagen and Audi immobilizer systems including multiple MQB, MED17, and EDC17 applications.
• Mercedes-Benz IMMO — Supports vehicle-dependent FBS3 key programming, EIS/EZS, ELV, ECU, transmission, and ISM functions.
• Toyota Smart Key — Supports multiple Toyota Smart Key procedures and supported All Keys Lost solutions.
• Xhorse Key Cutting Machine Control — Controls compatible Xhorse key cutting machines directly from the tablet.
• CAN FD — Supports CAN FD communication used in newer vehicles.
• DoIP — Supports Ethernet-based DoIP communication on supported vehicles.
• Built-in OBD Matrix Switch — Automatically routes OBD communication lines in many supported applications.
• Smart Key Simulator — Integrated simulator functionality for supported Smart Key systems.

OBD key programming

Key Tool Plus supports extensive vehicle-specific immobilizer programming.

Depending on vehicle, functions may include:

• Add Key
• All Keys Lost
• Key number checking
• Key enable / disable
• Smart Key programming
• Immobilizer reset
• ECU / IMMO synchronization
• Immobilizer procedures after module replacement
• PIN / Security Code functions
• Immobilizer data reading

Exact functions depend on vehicle make, model, model year, and immobilizer system.

BMW

Key Tool Plus supports multiple BMW immobilizer systems including:

• CAS3 / CAS3+
• CAS4 / CAS4+
• FEM
• BDC
• ECU ISN functions
• Add Key
• Supported All Keys Lost procedures
• Immobilizer module data reading and programming

Some procedures may require bench programming or optional adapters.

Mercedes-Benz

Vehicle-dependent Mercedes-Benz functions include:

• FBS3 key programming
• Add Key
• All Keys Lost
• Key enable / disable
• EIS / EZS functions
• ELV / ESL functions
• ECU replacement
• Transmission control unit replacement
• ISM functions
• Mercedes-Benz infrared key reading

Some online calculation functions may require Xhorse points or tokens.

Volkswagen / Audi

VAG functions include support for multiple systems depending on vehicle, including:

• IMMO 3 / IMMO 4 / IMMO 5
• MQB
• MED17 / EDC17
• Add Key
• Immobilizer data processing
• ECU and instrument data reading on supported systems

Advanced MQB and bench procedures may require additional adapters or module disassembly.

Transponder and remote functions

Key Tool Plus also operates as a standalone transponder and remote tool.

Functions include:

• Transponder identification
• Transponder generation
• Transponder cloning
• IC / ID identification
• Xhorse Super Chip generation
• Xhorse Universal Remote generation
• Xhorse Smart Key generation
• Remote Clone
• Remote Renew
• Frequency detection
• Smart Key simulation

PROG functions

The integrated programmer supports multiple vehicle modules and memory devices.

Applications may include:

• EEPROM
• FLASH
• MCU
• Immobilizer modules
• Instrument clusters
• Airbag modules
• ECU
• BMW CAS / FEM / BDC
• Land Rover RFA
• Porsche BCM
• Other software-supported modules

The required adapter depends on the chip or module being programmed.

Xhorse key cutting machine control

Key Tool Plus can connect to compatible Xhorse key cutting machines.

The tablet can be used to:

• Select vehicle and key profile
• Retrieve key cutting data
• Enter key codes
• Decode an original key
• Control automatic key cutting

This allows electronic and mechanical key work to be handled within the same system.

Technical specifications

• Operating system: Android 9
• Processor: Octa-core
• RAM: 4 GB
• Storage: 128 GB
• Display: 10.1” HD anti-glare
• Resolution: up to 2400 × 1080
• Rear camera: 13 MP
• Battery: 10,000 mAh
• Charging: 30 W fast charging
• Bluetooth: 5.0
• Wi-Fi: 2.4 GHz / 5 GHz
• USB: USB Type-C
• OBD interface: DB25
• Programming interface: DB15
• Remote interface: PS2
• Mercedes-Benz IR interface: Yes
• CAN FD: Yes
• DoIP: Yes

Package contents

Package contents vary depending on Key Tool Plus version and adapter configuration.

A typical base package includes:

• Xhorse VVDI Key Tool Plus tablet
• OBD DB25 cable
• USB Type-C cable
• Power adapter
• Remote Programming Cable
• PROG DB15 cable
• EEPROM adapter
• Mercedes-Benz IR adapter
• Mercedes-Benz NEC adapters
• Mercedes-Benz Power Adapter
• MC9S12 programming cable
• ECU cable
• Transponder storage container
• Selected legacy vehicle OBD adapters
• User documentation

Always verify the exact package configuration before ordering.

Please note

• Key Tool Plus is a professional key and immobilizer programming device.
• Vehicle-specific functions depend on software version, vehicle, and immobilizer system.
• Some bench and EEPROM procedures require optional adapters.
• Not all adapters are included with every Key Tool Plus package.
• Certain online functions, including some Mercedes-Benz calculations and ID48 procedures, may require Xhorse points or tokens.
• Xhorse provides online software updates for Key Tool Plus. Some major new or advanced functions may be subject to separate charges.